Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2009 >> 300 LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 240 (Electronic Control Modules (Service Information)) >> Electronic Control Modules - Service Information >> Module-Engine Control >> Removal >> Engine Control Module (ECM) Diesel

Engine Control Module (ECM) Diesel

WARNING: This page is about a different car, the 2008 Dodge Magnum, 2008 Dodge Charger, and 2008 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ECM Location
GC0040492Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Disconnect ECM electrical connectors (1).
  3. Remove ECM bracket to inner fender retaining nuts (5).
  4. Remove ECM and bracket assembly from vehicle.
  5. Separate ECM from bracket.
scientia non olet · About Mike's Workshop Manuals