Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2008 >> Sebring Base, 2D Convertible, 2.4 K >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Navigation System & Telecommunication System (Service Information)) >> Navigation/Telecommunication - Service Information >> Hands Free Module >> Removal >> Telecommunication Module

Telecommunication Module

WARNING: This page is about a different car, the 2008 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hands Free Module
GC0002417Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the center console between the second row seats.
  3. Remove the mounting fasteners.
  4. Disconnect the electrical harness connector and remove module.
scientia non olet · About Mike's Workshop Manuals