Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2008 >> Sebring Base, 2D Convertible, 2.4 J >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Electronic Control Modules (Service Information)) >> MODULE, Anti-Lock Brake System >> Removal >> Removal

MODULE, Anti-Lock Brake System: Removal: Removal

WARNING: This page is about a different car, the 2009 Dodge Avenger and 2009 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For vehicles equipped with Hill Start Assist (HSA), the ICU must be serviced as an assembly. The HCU and ABM are not serviceable separately.

Due to packaging and limited space it is necessary to remove and disassemble the Integrated Control Unit (ICU) to service the Antilock Brake Module (ABM) on this vehicle. Refer to Brakes/Hydraulic/Mechanical/INTEGRATED CONTROL UNIT (ICU) - Removal .

scientia non olet · About Mike's Workshop Manuals