Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Town & Country Base >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Exhaust Gas Recirculation >> VALVE, Exhaust Gas Recirculation (EGR) >> Removal >> 3.3/3.8L Engine

3.3/3.8L Engine

Fig 1: EGR VALVE MOUNTED
GC0069639Courtesy of CHRYSLER LLC
  1. Disconnect and isolate negative battery cable.
  2. Remove accessory drive belt. Refer to ACCESSORY DRIVE .
  3. Remove generator mounting bolts and reposition generator. Refer to REMOVAL .
  4. Unlock and disconnect the electrical connector from the EGR valve.
  5. Remove the 2 EGR tube bolts.
    Fig 2: EGR VALVE GASKET
    GC0069640Courtesy of CHRYSLER LLC
  6. Remove the 2 mounting bolts for the EGR valve and gasket.
scientia non olet · About Mike's Workshop Manuals