Active Fault And System Alerts

An active fault will be triggered when a system failure has been detected. When this occurs, the Instrument Cluster will illuminate the TPMS indicator and the SKREEM will store the fault code. An alert will be triggered when a tire pressure has gone below or above the set threshold pressure. When this occurs, the Instrument Cluster will flash the TPMS indicator. The SKREEM will request a secondary message to be displayed on the EVIC (if equipped). Only when a tire pressure has gone below the set threshold pressure will the SKREEM request the TPMS indicator to flash and display the EVIC message (if equipped). When a high pressure alert occurs, only the EVIC message will be displayed. This action will be displayed as long as the alert condition is active.