Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Sensor-Engine Coolant Temperature >> Removal >> Removal-2.0/2.4L >> Cylinder Block Mounted

Cylinder Block Mounted

Fig 1: Identifying ECT Sensor
GC0058755Courtesy of CHRYSLER LLC
1 - ECT
  1. Disconnect negative battery cable.
  2. Partially drain cooling system below level of ECT Sensor.
  3. Disconnect ECT Sensor electrical connector.
  4. Remove ECT Sensor.
scientia non olet · About Mike's Workshop Manuals