Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (3.5L Engine (Service Information)) >> Engine Mounting >> Mount-Left >> Removal >> Left Mount

Left Mount

WARNING: This page is about a different variant/trim than selected.
Fig 1: Removing/Installing Left Engine Mount
GC0060244Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Remove air cleaner housing assembly. See REMOVAL .
  3. Support transmission with floor jack and wooden block.
  4. Remove the four vertical bolts (1).
  5. Remove mount (2) from mounting bracket.