Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Sebring Base, 2.4 K >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - Electrical Diagnostics >> DTC Troubleshooting >> C2204-Dynamics Sensor Internal >> Monitor Conditions

Monitor Conditions

  1. When Monitored: 

    Continuously, with ignition on, until vehicle speed exceeds 20 km/h (12.4 mph.) for the first time, but not if the sensor voltage is out of range.

    Or, during diagnostic mode.

    Or, if the monitoring was inhibited by a corresponding diagnostics command.

    Or, if the vehicle speed has exceeded 20 km/h (12.4 mph) during the actual ignition cycle.

    Or, if at least one over spinning wheel is detected.

    Or, if one of the control functions is active.

scientia non olet · About Mike's Workshop Manuals