Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Pacifica Base, 3.8 L >> Repair and Diagnosis >> Electrical >> Gauges >> Navigation System & Telecommunication System (Service Information) >> Navigation/Telecommunication - Service Information >> Navigation Unit >> Removal >> Navigation Unit

Navigation Unit

  1. Disconnect and isolate the battery negative cable.
  2. Remove rear floor stowage tray. Refer to REMOVAL .
  3. Remove mounting fasteners. See Fig 1.
    Fig 1: Navigation Unit
    GC0002418Courtesy of CHRYSLER LLC
    1 - ANTENNA CABLE - NAVIGATION
    2 - ELECTRICAL HARNESS CONNECTOR
    3 - NAVIGATION UNIT
  4. Disconnect electrical harness connector and antenna cable from navigation unit.
  5. Remove navigation unit from mounting bracket.
scientia non olet · About Mike's Workshop Manuals