Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> DTCS P150D To UO168, Pre-Diagnostic Troubleshooting Procedure >> U0140-Lost Communication With Body Control Module (TIPM) >> Diagnostic Test

Diagnostic Test

  1. 1) ACTIVE DTC 
    NOTE: For vehicle communication problems, use the scan tool to refer to the Network Review Screen. The screen depicts a high level view of the vehicle network. Fault and problem areas appear in red. Selecting any of the network components allows access to the source of the problem.

    Ignition on, engine not running.

    With a scan tool, select View DTCs.

    Is the status Active for this DTC? 

    Yes 

    1. Refer to DIAGNOSIS AND TESTING for diagnostic procedures and for further possible causes.

    No 

    1. Refer to the *CHECKING FOR AN INTERMITTENT DTC Diagnostic Procedure. Refer to INTERMITTENT CONDITION .
    2. Perform POWERTRAIN VERIFICATION TEST Ver. 1.