Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Fuel System) >> Fuel Injection - 3.5L Gas >> Map Sensor >> Removal >> Sensor-Manifold Absolute Pressure (Map)

Sensor-Manifold Absolute Pressure (Map)

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative cable.
  2. Remove the engine cover.
  3. Remove the air filter housing.
    Fig 1: Locating Intake Manifold Pressure Sensor
    GC0066367Courtesy of CHRYSLER LLC
  4. Disconnect the MAP sensor harness connector (1).
  5. Remove the bolts (3) from the MAP sensor.
  6. Remove the MAP sensor (2).
scientia non olet · About Mike's Workshop Manuals