Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.5L Engine (Service Information)) >> Engine Block >> Plate-Flex >> Removal

Engine Block: Plate-Flex: Removal

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Flywheel
GC0066229Courtesy of CHRYSLER LLC
  1. Remove the transaxle.
  2. Remove 8 flex plate attaching bolts (2).
  3. Remove backing plate (3).
  4. Remove the flex plate (1).
scientia non olet · About Mike's Workshop Manuals