Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (3.5L Engine (Service Information)) >> Engine Block >> Crankshaft Lock >> Installation

Crankshaft Lock: Installation

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft And Crankshaft Timing And TDC
GC0066191Courtesy of CHRYSLER LLC
  1. Turn the crankshaft until the timing marks line up at 40 degrees after top dead center.
    Fig 2: Crankshaft Locking Tool
    GC0066245Courtesy of CHRYSLER LLC
  2. Disconnect the exhaust system at the left manifold and position aside.
  3. Remove the starter.
  4. Install the crankshaft locking tool (1).
scientia non olet · About Mike's Workshop Manuals