Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (Ignition Control (Service Information)) >> Ignition Control >> Knock Sensor >> Removal >> Sensor-Knock - 3.5L - Left

Sensor-Knock - 3.5L - Left

WARNING: This page is about a different car, the 2008 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper intake manifold. Refer to REMOVAL .
    Fig 1: Right And Left Knocks Sensors, Harness Connectors And Bolts
    GC0065529Courtesy of CHRYSLER LLC
  3. Disconnect the Left Knock Sensor harness connector (2).
  4. Disconnect the Left Knock Sensor bolt (4).
    Fig 2: Right And Left Knocks Sensors, Harness Connectors And Bolts
    GC0065529Courtesy of CHRYSLER LLC
  5. Remove the Left Knock sensor (6).
scientia non olet · About Mike's Workshop Manuals