Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Exhaust Gas RECIRCULATION Valve >> Solenoid >> Installation >> Installation - EGR Solenoid

Installation - EGR Solenoid

Fig 1: Locating Solenoid Mounting Bolts
GC0033611Courtesy of CHRYSLER LLC
  1. Position the solenoid to valve and loosely install solenoid to valve bolt (2).
  2. Install the valve bolt (1) to cylinder head. Tighten to 31 N.m (23 ft. lbs.).
  3. Tighten the solenoid to valve bolt (2) to 11 N.m (95 in. lbs.).
    Fig 2: Locating Solenoid & Vacuum Lines
    GC0033610Courtesy of CHRYSLER LLC
  4. Connect the vacuum hoses (2).
  5. Connect the EGR solenoid harness connector (1).
  6. Install the air cleaner housing.
  7. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals