Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Battery System) >> Battery Tray >> Installation

Battery Tray: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Battery Tray
GC0015627Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the battery tray in the vehicle and install the mounting fasteners.
    Fig 2: Removing/Installing Power Distribution Center
    GC0015626Courtesy of DAIMLERCHRYSLER CORP.
  2. Position the Power Distribution Center (PDC) onto the battery tray mounting tabs. Gently apply downward pressure on the PDC until it snaps into place.
  3. Install the battery, (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - INSTALLATION) .
scientia non olet · About Mike's Workshop Manuals