Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2007 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 186 (Starting System) >> Starting >> Diagnosis And Testing >> Control Circuit Test >> Notes

Control Circuit Test: Notes

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

The starter control circuit has:

  1. Starter motor with integral solenoid
  2. Starter relay
  3. Transmission range sensor or Park/Neutral Position switch with automatic transmissions
  4. Ignition switch
  5. Battery
  6. All related wiring and connections
  7. Powertrain Control Module (PCM)
CAUTION: Before performing any starter tests, the ignition and fuel systems must be disabled.
  1. Disable ignition and fuel systems.