Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Coolant Outlet Connector >> Installation >> 2.4L Engine

2.4L Engine

  1. Clean sealing surfaces. Inspect gaskets for tears and cuts. Replace as necessary.
  2. Install coolant outlet connector and tighten bolts to 12 N.m (105 in. lbs.). See Figure.
  3. Connect hoses at coolant outlet connector.
  4. Fill cooling system ((Refer to COOLING - STANDARD PROCEDURE) ).
scientia non olet · About Mike's Workshop Manuals