Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Power Door Lock System (Service Information)) >> Standard Procedure >> Standard Procedure - Transmitter Programming >> Programming Procedure

Programming Procedure

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.

Transmitter programming by the customer is done by performing the following steps:

  1. Insert the key into the ignition switch.
  2. Press either the lock or unlock button momentarily twice.
  3. Turn the key in the ignition switch to the ON/RUN position within 30 seconds.
scientia non olet · About Mike's Workshop Manuals