Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Emissions Control System) >> Air Injection >> Switchover Valve >> Removal

Switchover Valve: Removal

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Switchover Valve
GC0033627Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Remove the air cleaner housing.
  3. Disconnect the vacuum line (3).
  4. Disconnect the air pump switchover tube (2).
  5. Remove the air pump switchover valve retaining bolt (4).
  6. Remove the air pump switchover valve (1) discard the old gasket.
scientia non olet · About Mike's Workshop Manuals