Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Vehicle Theft Security System (Service Information)) >> Anti-Theft Tow Sensor >> Installation

Anti-Theft Tow Sensor: Installation

WARNING: This page is about a different car, the 2006 Chrysler Crossfire. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting/Connecting Anti-Theft Tow Sensor Electrical Connector
GC0035765Courtesy of DAIMLERCHRYSLER CORP.
NOTE: Install the anti-theft tow sensor with the "UP" mark properly positioned.
  1. Connect the anti-theft tow sensor electrical connector (1).
    Fig 2: Identifying Anti-Theft Tow Sensor Bracket Bolt
    GC0035764Courtesy of DAIMLERCHRYSLER CORP.
  2. Install the bolt (1) to the anti-theft tow sensor bracket.
  3. Install the right side trunk inner trim panel.
scientia non olet · About Mike's Workshop Manuals