Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Battery System) >> Battery HOLDDOWN >> Removal

Battery HOLDDOWN: Removal

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
  2. Remove the two nuts that secure the battery hold down brackets to the battery tray.
  3. Remove the battery hold down brackets.
scientia non olet · About Mike's Workshop Manuals