Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Battery System) >> Battery HOLDDOWN >> Installation

Battery HOLDDOWN: Installation

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery hold down brackets.
  2. Install the two nuts that secure the battery hold down brackets to the battery tray. Tighten to 70 in. lbs.
scientia non olet · About Mike's Workshop Manuals