ICU (Integrated Control Unit): Disassembly

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the pump/motor wiring harness from the CAB. See Fig 1.

Fig 1: Pump/Motor To CAB Wiring Harness (Typical)

Courtesy of DAIMLERCHRYSLER CORP.

1 - CAB

2 - PUMP MOTOR WIRING HARNESS

3 - PUMP MOTOR

4 - HCU VALVE BLOCK

Remove the 4 bolts attaching the CAB to the HCU. See Fig 2.

Fig 2: CAB Attaching Bolts (Typical)

Courtesy of DAIMLERCHRYSLER CORP.

1 - MOUNTING BOLTS

2 - CAB

3 - HCU VALVE BLOCK

Remove the CAB from the HCU.

NOTE: For assembly, (Refer to BRAKES - ABS/HYDRAULIC/MECHANICAL/ICU (INTEGRATED CONTROL UNIT) - ASSEMBLY .