Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (HVAC Systems) >> Distribution >> Floor Distribution Duct >> Installation

Floor Distribution Duct: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the floor distribution duct into the vehicle.
  2. Connect the floor distribution duct to the HVAC housing.
  3. Install the one screw and one nut that secure the floor distribution duct to the dash panel. Tighten the screw and nut to 2 N.m (17 in. lbs.).
  4. Install the instrument panel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL ASSEMBLY - INSTALLATION) .
  5. Reconnect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals