Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Body Diagnostic Procedures) >> System Description And Functional Operation >> Power Door Entry System >> Unlatch Output

Unlatch Output

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.

When the BCM is required to perform an unlatch function, the output power wave to drive the doors off of the primary latch is:

  1. Power ON for 63ms.
  2. Power OFF for 31ms.
  3. Power ON for 94ms.

A single pulse to the unlatch motors causes breakage of the gears. A dual pulse lessens the motor torque and provides longer life to the gears.

scientia non olet · About Mike's Workshop Manuals