Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Pacifica Base, 3.8 L >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Driver Seat Switch >> Installation

Driver Seat Switch: Installation

  1. Position the seat switch onto the door trim panel. Press into place ensuring all four clips are engaged.
  2. Reconnect the wire harness connector to the door module.
  3. Install the front door trim panel. Refer to the INTERIOR/EXTERIOR article for the procedure.
  4. Reconnect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals