Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Rack & Pinion Power Steering System >> Column >> Steering Column Control Module >> Removal >> Removal >> Disassembly

Removal: Disassembly

Fig 1: LEFT - STALK RETAINING SCREW
GC0041408Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the left multi-function switch stalk retaining screw (2).
  2. Pull the left talk out of the SCCM.
    Fig 2: LEFT - STALK ELECTRICAL CONNECTOR
    GC0041407Courtesy of DAIMLERCHRYSLER CORP.
  3. Disconnect the left stalk electrical connector.
  4. Separate the left switch from the SCCM.
    Fig 3: RIGHT - STALK RETAINING SCREW
    GC0042964Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the one right multi-function switch retaining screw.
  6. Pull right switch out of SCCM.
    Fig 4: RIGHT - STALK ELECTRICAL CONNECTOR
    GC0042965Courtesy of DAIMLERCHRYSLER CORP.
  7. Disconnect the right switch electrical connector.
scientia non olet · About Mike's Workshop Manuals