Removal - Except SRT

Fig 1: Identifying Engine Appearance Cover

Courtesy of DAIMLERCHRYSLER CORP.

Disconnect the negative battery cable.
Partially drain the cooling system. (Refer to COOLING/ENGINE/COOLANT - STANDARD PROCEDURE) .
Remove the engine cover (1). Grasp both corners of the engine cover, and pull up firmly.

Fig 2: Disconnecting/Connecting Engine Coolant Temperature Sensor Harness Connector
Courtesy of DAIMLERCHRYSLER CORP.
Disconnect the engine coolant temperature sensor harness connector (1).

Fig 3: Locating Engine Coolant Temperature Sensor Retaining Clip
Courtesy of DAIMLERCHRYSLER CORP.
Pull up on the engine coolant temperature sensor retaining clip (1) and slide the engine coolant temperature sensor out of the housing.
Remove the engine coolant temperature sensor from the engine.