Hard Wired Inputs
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
The hard wired inputs to the EMIC include the following:
NOTE:
Final approved circuit names were not yet available at the time this information was compiled.
- Airbag Indicator Driver
- Ambient Temperature Sensor Signal (Optional)
- Brake Wear Indicator Sense
- Charging Indicator Driver
- Coolant Level Switch Sense
- Front Door Jamb Switch Sense
- Fuel Level Sensor Signal
- Fused B(+)
- Fused Ignition Switch Output
- High Beam Indicator Driver
- Key-In Ignition Switch Sense
- Left Turn Signal
- Park Brake Switch Sense
- Right Turn Signal
- Seat Belt Switch Sense
- Washer Fluid Switch Sense (Optional)
Refer to the appropriate wiring information for additional details.