Alb Lever: Installation
WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
- Install the lever to the vehicle.
- Install the lower mounting bolt to the axle. See Fig 1.
- Install the lever to the shock bolt and then install the clip. See Fig 1.
- Check the side deflection of the ALB lever with a straight edge from Point-A to Point-B as the graphic shows. Max deflection play of the actuator rod should be no more than 15 mm (.60 in). See Fig 1.
- Lower the vehicle.
| 1 - CLIP |
| 2 - SPRING |
| 3 - LEVER |
| 4 - STRAIGHT EDGE |
| 5 - NUT |
| 6 - POINT -A |
| 7 - POINT - B |
| 8 - SUSPENSION POINT |