Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Mechanical Brake System - Base (Service Information)) >> Alb Controller >> Removal

Alb Controller: Removal

WARNING: This page is about a different car, the 2006 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the brake pedal rod to hold the brake pressure.
  2. Raise and support the vehicle.
  3. Remove the brake lines to the (automatic load-dependent brake pressure control) ALB controller.
  4. Remove the adjusting nut and the spring from the ALB controller.
  5. Remove the mounting bolts.
  6. Remove the ALB controller.
scientia non olet · About Mike's Workshop Manuals