Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System (Service Information) >> Esp Service Information >> Operation >> Start-Up Cycle

Start-Up Cycle

Fig 1: Identifying Antilock Warning Indicator Lamp
GC0033908Courtesy of DAIMLERCHRYSLER CORP.

There is a antilock warning indicator lamp in the instrument cluster. When the ignition is switched on (ignition switch in position "2"), the antilock warning indicator lamp in the instrument cluster illuminates, this is referred to as a bulb check the antilock warning indicator lamp then goes out after the engine is started. If the antilock warning indicator lamp illuminates when the engine is running, there may be a fault in the ABS system. The system is at this point inoperative, but full operation of the normal braking system is retained without ABS protection.