Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> Sebring TSi >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Cruise Control Systems - Coupe) >> Auto-Cruise Control System Diagnosis >> Auto-Cruise Control System Diagnostic Trouble Code Diagnosis >> Diagnostic Result Display Method When Using The Auto-Cruise Control Indicator Light >> Without using scan tool MB991502

Without using scan tool MB991502

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch to the "ON" position while holding the auto-cruise control switch in the "SET" (down) position. Then, within one second, more the auto-cruise control switch up to the "RES" position.
  2. Check to make sure the "CRUISE" light on the instrument panel is flashing.
  3. Put the auto-cruise control switch in the "SET" (down) position. Depress the brake pedal and hold for five seconds or more. Release the brake pedal, auto-cruise control switch, then turn the ignition switch to the "LOCK" (OFF) position. The DTC(s) are now erased.
    Fig 1: Identifying Ignition Switch Direction
    G04539300Courtesy of DAIMLERCHRYSLER CORPORATION
scientia non olet · About Mike's Workshop Manuals