Symptom Chart
WARNING: This page is about a different variant/trim than selected.
SYMPTOM CHART
| SYMPTOMS | INSPECTION PROCEDURE NO. | ||
|---|---|---|---|
| Communication with scan tool MB991502 is not possible. | Communication with all systems is not possible. | 2.4L Engine | Refer to INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.) |
| 3.0L Engine | Refer to INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.) | ||
| Communication with auto-cruise control-ECU only is not possible. | 1 | ||
| Auto-cruise control is not cancelled. | When brake pedal is depressed. | 2 | |
| When clutch pedal is depressed. < M/T > | 3 | ||
| When selector lever is moved to "N" range. < A/T > | 4 | ||
| When "CANCEL" switch is turned ON. | 5 | ||
| Auto-cruise control cannot be set. | 6 | ||
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. < M/T > | 7 | ||
| Hunting (repeated acceleration and deceleration) occurs at the set vehicle speed. < A/T > | 8 | ||
| Auto-cruise control indicator light inside combination meter does not illuminate. (However, auto-cruise control is normal). | 9 | ||