Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Brush holder screw | 5.7 +/- 1.5 N.m (151 +/- 13 in-lb) |
| Cover nut | 3.4 +/- 1.0 N.m (30 +/- 9 in-lb) |
| Cover bolt | 5.8 +/- 1.6 N.m (52 +/- 14 in-lb) |
| Magnetic switch bolt | 5.8 +/- 1.6 N.m (52 +/- 14 in-lb) |
| Rear bracket bolt | 3.4 +/- 1.0 N.m (30 +/- 9 in-lb) |
| Stator bolt | 30 +/- 3 N.m (23 +/- 2 ft-lb) |
| Starter cover bolt < 2.4L ENGINE > | 4.9 +/- 1.0 N.m (44 +/- 8 in-lb) |