Symptom Chart
SYMPTOM CHART
| SYMPTOMS | INSPECTION PROCEDURE NO. |
|---|---|
| Communication between the scan tool and all systems is not possible. | 2.4L - INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.) 3.0L - INSPECTION PROCEDURE 1: COMMUNICATION WITH SCAN TOOL IS NOT POSSIBLE. (COMMUNICATION WITH ALL SYSTEMS IS NOT POSSIBLE.) |
| Communication between the scan tool and the ABS-ECU is not possible. | INSPECTION PROCEDURE 1: COMMUNICATION BETWEEN THE SCAN TOOL AND THE ABS-ECU IS NOT POSSIBLE. . |
| When the ignition switch is turned to "ON" (Engine stopped or after start-up), the TCL warning light does not illuminate. | 1 |
| The TCL warning light remains illuminated after the engine is started. | 2 |
| The TCL system does not operate. | 3 |