Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> Sebring Base, 2D Convertible, 2.7 T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Front Axle - Coupe) >> General Description >> Front Axle

Front Axle

WARNING: This page is about a different variant/trim than selected.

The front axle consists of a knuckle, front hub, unit bearing and drive shaft. The unit bearing is press-fitted to the front hub and bolted to the knuckle. Also, the unit bearing utilizes a double row angular contact ball bearing. The drive shaft has a tripod joint (TJ) on the transaxle side and a Birfield joint (BJ) on the wheel side. A center bearing and an inner shaft have been adopted in 3.0L engine.

scientia non olet · About Mike's Workshop Manuals