Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Navigation System & Telecommunication System (Service Information)) >> Hands Free Module >> Removal

Hands Free Module: Removal

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting/Connecting Hands Free Module Connector
GC0016215Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Disconnect and isolate the battery negative cable.
  2. Remove the glove box.
  3. Disconnect the electrical harness connector.
    Fig 2: Removing/Installing Hands Free Module
    GC0016214Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the mounting fasteners
  5. Remove the hands free module.
scientia non olet · About Mike's Workshop Manuals