Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Electronic Control Modules - Electrical Diagnostics) >> DTC Troubleshooting >> B2215-Front Control Module Internal >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. 1)  REPLACE THE FRONT CONTROL MODULE IF DTC IS ACTIVE 

    With the scan tool, read the active FCM DTC's.

    Does the scan tool display this DTC as active? 

    Yes 

    1. Replace and program the Front Control Module. Refer to MODULE-FRONT CONTROL .
    2. Perform BODY VERIFICATION TEST - VER 1 .

    No 

    1. If the DTC is stored, check for an intermittent condition. Visually inspect the related wiring harness connectors. Look for broken, bent, pushed out, or corroded terminals.
scientia non olet · About Mike's Workshop Manuals