Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (Fuel System) >> Fuel Injection >> Sensor-Manifold Absolute Pressure >> Installation >> 5.7L

Sensor-Manifold Absolute Pressure: Installation: 5.7L

WARNING: This page is about a different car, the 2005 Dodge Magnum and 2005 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: MAP SENSOR LOCATION 5.7L
GC0013147Courtesy of DAIMLERCHRYSLER CORP.
  1. Clean MAP sensor mounting hole at intake manifold.
  2. Check MAP sensor o-ring seal for cuts or tears.
  3. Position sensor (3) into intake manifold.
  4. Rotate sensor 1/4 turn clockwise for installation.
  5. Connect electrical connector (2) to sensor (3).
scientia non olet · About Mike's Workshop Manuals