Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 166 (Charging System) >> Generator >> Installation >> Installation - 2.4L

Installation - 2.4L

WARNING: This page is about a different car, the 2005 Dodge Grand Caravan, 2005 Dodge Caravan, and 2005 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the generator.
  2. Install the accessory drive belt, refer to COOLING for proper procedures.
  3. Connect B+ terminal to generator.
  4. Install nut holding B+ wire terminal to back of generator.
  5. Connect the push-in field wire connector to back of generator.
  6. Install the EVAP Purge solenoid to its bracket.
  7. Install the Air Box, refer to AIR CLEANER ELEMENT for more information.
  8. Connect the Inlet Air Temperature sensor.
  9. Connect battery negative cable.
scientia non olet · About Mike's Workshop Manuals