Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fuel System) >> Fuel Injection >> Inlet Air Temperature Sensor >> Installation

Inlet Air Temperature Sensor: Installation

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install inlet air tube to air cleaner lid and tighten clamp.
  2. Install inlet air tube to throttle body and tighten clamp.
  3. Install air cleaner lid to air cleaner box.
  4. Connect the inlet air temperature sensor electrical connector.
  5. Connect the negative battery cable.
scientia non olet · About Mike's Workshop Manuals