Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Battery System) >> Battery Cables >> Installation

Battery Cables: Installation

WARNING: This page is about a different car, the 2005 Dodge SX, 2005 Dodge SRT-4, and 2005 Dodge Neon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the battery cables in the engine compartment.
  2. One at a time, install the battery cable retaining pushpins, fasteners and routing clips until the cables are installed exactly where they were in the vehicle.
  3. Install the battery in the vehicle. Refer to the procedure in this article.
  4. Connect the remote battery negative cable terminal.
scientia non olet · About Mike's Workshop Manuals