Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System >> Door Lock Switch >> Installation

Door Lock Switch: Installation

  1. Install the switch on trim panel.
  2. Install two attaching screws to switch.
  3. Connect wire connector to door lock switch.
  4. Install front door trim panel (Refer to BODY/DOOR - FRONT/TRIM PANEL - INSTALLATION) .
  5. Connect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals