Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Power Liftgate System) >> Full Open Switch >> Removal

Full Open Switch: Removal

WARNING: This page is about a different car, the 2006 Dodge Grand Caravan, 2006 Dodge Caravan, and 2006 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the lift gear and link rod assembly from the vehicle (Refer to ELECTRICAL/POWER DOORS/CONTROL ROD - REMOVAL) .
  3. Cut the two wires leading to the full open switch or back the wires out of the electrical connector.
  4. Remove the full open switch retaining screw and remove the full open switch from the gear motor housing assembly.
scientia non olet · About Mike's Workshop Manuals