Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> Crossfire SRT-6, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (3.2L Engine (Service Information)) >> Oil Level/Temperature Sensor >> Removal

Oil Level/Temperature Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the lower oil pan. (Refer to ENGINE/LUBRICATION/OIL PAN - REMOVAL) .
    Fig 1: Disconnecting/Connecting Oil Level/Temperature Sensor Harness Connector
    GC0034493Courtesy of DAIMLERCHRYSLER CORP.
  2. Disconnect the oil level/temperature sensor harness connector (1).
    Fig 2: Identifying Oil Level/Temperature Sensor Screws & Harness Retainer Screws
    GC0034492Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the two oil level/temperature sensor screws (1).
  4. Remove the two harness retainer screws (2) and the oil level/temperature sensor.
scientia non olet · About Mike's Workshop Manuals