Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension System >> Wheel Alignment >> Standard Procedure >> Checking And Adjusting Front Axle Camber And Caster >> Checking

Checking And Adjusting Front Axle Camber And Caster: Checking

  1. Observe the general information on chassis alignment check. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
  2. Check the vehicle level at the front and rear axles. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
  3. Check the vehicle level at the front and rear axles with an electronic inclinometer and adjust if necessary. (Refer to SUSPENSION/WHEEL ALIGNMENT - STANDARD PROCEDURE) .
  4. Check the camber and assign to tabular value. (Refer to SUSPENSION/WHEEL ALIGNMENT - SPECIFICATIONS) .
    NOTE: Measure with the wheels turned to 20°.
  5. Check the caster and assign to tabular value. (Refer to SUSPENSION/WHEEL ALIGNMENT - SPECIFICATIONS) .
scientia non olet · About Mike's Workshop Manuals