Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> DTCS P0600 To P2008 >> Diagnosis And Testing >> (P0702) Transmission Control System (Mil Request) >> Diagnostic Test

Diagnostic Test

  1. 1)   DTC PRESENT IN TRANSMISSION CONTROL MODULE (TCM)
    Fig 1: Connecting Scan Tool & Turning Ignition On
    GC0032455Courtesy of DAIMLERCHRYSLER CORP.

    This is an informational DTC letting you know that a DTC(s) is stored in the Transmission Control Module.

    Using the DRB III(R), read the Transmission Controller DTC and refer to NAG1 - ELECTRICAL DIAGNOSTICS and perform the appropriate symptom.

    Erase this DTC from the PCM after all Transmission DTC(s) have been repaired.

    PCM Diagnostic Information complete. 

    Continue 

    1. Test Complete.