Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 385 (Overhead Console (Service Information)) >> Overhead Console - Service Information >> Installation >> Overhead Console Bracket

Overhead Console Bracket

WARNING: This page is about a different car, the 2005 Dodge Durango. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: OVERHEAD CONSOLE BRACKET
GC0010254Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the overhead console bracket (2) to the headliner (1) and roof front header.
  2. Install and tighten the two screws (4) that secure the front of the overhead console bracket (2) to the roof front header. Tighten the screws to 1.9 N.m (17 in. lbs.).
    Fig 2: OVERHEAD CONSOLE HOUSING
    GC0010252Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the overhead console (1) onto the overhead console bracket. (Refer to ELECTRICAL/OVERHEAD CONSOLE - INSTALLATION) .
  4. Reconnect the battery negative cable.
scientia non olet · About Mike's Workshop Manuals